How Can Machinery Be Prevented from Shifting Inside a Container? What Securing Evidence Should Buyers Request from the Packer?
Procurement teams should include loading layouts, securing plans and on-site photographs in shipping records.

Buyers should treat container packing as a separate delivery stage
After equipment has been packaged, buyers still need to check how it will be supported and secured inside the transport unit.
IMO describes the CTU Code, jointly developed by IMO, ILO and UNECE, as a non-mandatory global code of practice for packing and handling transport units used in sea and land transport. [Source 1] It provides a starting point for checking loading plans and securing arrangements. Buyers should not consider container packing complete merely because the doors can be closed.
A machine remaining stable at the factory does not mean it will not move during transport. Procurement teams should have the party responsible for packing provide information on equipment weight, center of gravity and securing points, then have competent personnel determine the loading and securing plan.
How buyers can prepare information before container packing
The following are procurement recommendations. Buyers can ask the equipment supplier, packaging provider and container packer to agree on their respective responsibilities. The equipment supplier explains the center of gravity and permitted load-bearing points; the packaging provider explains the packaging structure; and the packer explains how the cargo will be safely connected to the transport unit.
The CTU Code covers loading planning, tight stowage and securing through methods such as blocking and lashing. [Source 2] Procurement staff should have specialists select methods for the actual transport mode and cargo conditions, rather than copy the arrangement for another machine from a photograph.
| Information the buyer should check | What the responsible party should explain |
|---|---|
| Basic cargo data | Weight, dimensions, center of gravity and permitted load-bearing points |
| Transport unit conditions | Suitability, condition and relevant load limits |
| Loading plan | Positioning, weight distribution and operating sequence |
| Securing plan | Blocking and lashing components, and the basis for their load calculations |
| Completion records | Overall photographs and photographs of securing points, components and the container number |
How buyers can review photographic records
Buyers can ask the packer to take photographs at three stages: inspection of the empty container, the securing process and the check before the doors are closed. The photographs should be linked to the same container number and order. Buyers should specifically request photographs of locations that will be difficult to see after completion, rather than only a front view of the cargo.
If the transport unit is replaced, the equipment is repositioned or securing materials are reduced during packing, the responsible party should have specialists reconfirm the plan and record the changes. Procurement teams should not use delivery pressure as a reason to cancel securing checks.
Scope and limitations
The CTU Code is a code of practice. It does not replace applicable law, dangerous-goods requirements or carrier rules. Oversized, overweight or dangerous cargo and special equipment require dedicated plans. Buyers cannot use this article to determine the number of lashings, material specifications or load calculations, and should not treat photograph review as a substitute for an on-site professional inspection.
FAQ
Can buyers accept cargo simply because it is positioned tightly against the container wall?
Buyers should ask specialists to confirm the suitability of the container structure, cargo and securing method. Position alone is not enough to judge.
Which photographs should buyers retain?
Buyers should retain photographs of the empty container's condition, the loading process, securing points and the overall arrangement before door closure, linked to the container number and archived with the plan.
Who should buyers ask to confirm the securing plan?
Buyers should identify a person responsible for loading or cargo securing who has the relevant competence, and have the equipment and packaging suppliers provide the necessary data.
Suggested use on stellar.shop
When purchasing machinery on stellar.shop, buyers can include requirements for weight, packaging and container-packing information in their inquiries, and confirm in advance whether suppliers can work with a professional loading team.